# changelog

author: Peter Lemenkov <lemenkov@gmail.com> - 1.4.16-10
changelog:
  - Remove EL4 and EL5 support
  - Backport patches to fix check_linux_raid in case of resyncing (rhbz #504721)
  - Fix smart attribute comparison (rhbz #913085)


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.5-1
changelog:
  - Update to version 1.5
  - New project homepage and source download locations
  - Disabled patches 1, 6, 8, and 9.
  - No linux_raid subpackage (the contrib directory was removed)


author: Sam Kottler <skottler@fedoraproject.org> - 2.0.1-1
changelog:
  - Update to 2.0.1
  - Moved SSD-specific patch which landed upstream
  - Update patch to binary paths in plugins-scripts/check_log.sh so it applies
  - Add -uptime subpackage


author: Trond Hasle Amundsen <t.h.amundsen@usit.uio.no> - 1.4-3
changelog:
  - Fix specfile bug that resulted in wrong requires for ownership of
    the nagios plugins directory
  - Conditionalize building man pages for rhel6+ and fedora19+ (others
    will use pre-built man pages)


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 22.84.13-20
changelog:
  - Update Japanese patch to xdvik-22.84.13-j1.40.patch.gz
  - Rework patch to allow simultaneous building of xdvik and pxdvik - now called
    xdvik-22.84.13-pxdvi.patch
  - Rename vfontmap to xdvi-ptex.map
  - Rework patch to build pxdvik against system installed libraries - now called
    xdvik-22.84.13-pxdvi-use-system-libs.patch


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 22.84.14-1
changelog:
  - Update to version 22.84.14
  - Update Japanese patch to 22.84.14-j1.40
  - Rework patch allowing both normal and Japanese versions to be built
  - Remove no longer needed patches that have been merged upstream:
  - Various spec file fixups


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 22.84.14-2
changelog:
  - Fix previous spec file changelog entry
  - Fix Japanese font handling (BZ 465391) by reworking pxdvi patch


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 22.84.14-4
changelog:
  - Add patch to fix zero key handling (BZ 470942)
  - Remove texlive-2007-xprint.patch which actually hasn't been applied during
    22.84.14 packaging


author: Gábor Horváth <ghorvath@erad.com>
changelog:
  - Repository packages renamed. Added -released prefix to main repo, replaced -test postfix with -unreleased.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added: support for 64 bit MEDSRV builds.
  - Added: subpackage 'medsrv-requires' will have same requires as server package. This package can be preinstalled, which helps with offline operations. This functionality was taken over from 'medsrv-tools'
  - Added subpackage: 'medsrv-mysql-conf-embedded' to provide a 'medsrv-mysql-configuration', and require component/embedded mysql binaries package.
  - Added subpackage: 'medsrv-mysql-conf-system' to provide a 'medsrv-mysql-configuration', and require community/system  mysql packages.
  - Added: all packages providing 'medsrv-mysql-configuration' shall require 'medsrv-requires', because it must be added at all costs.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed: main repo package renamed to "erad-repo-medsrv<ver>-released", it can not upgrade previous versions. It will not obsolete themeither.
  - Changed: split released and undreleased repo config package.
  - Changed: Summaries and descriptions should be better now.
  - Fixed: all packages built together should have exact dependencies to each other (version-release).
  - Changed: offline package renamed to media.
  - Changed: dependencies and conflicts between repo config sub packages. Released subpkg conflicts with media. Unreleased subpkg requires released package. 
  - Changed: do not conflict between repo config package versions.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 3.4.4-1
changelog:
  - Update to 3.4.4; CVE-2012-6096 (#893269)
  - Refactored the patch nagios-0010-Added-several-images-to-the-sample-config.patch
    as patch can't create binary files (#875362).
    The old patch10 was replaced by nagios-0010-Added-several-images-to-the-sample-config-revb.patch
    and the PNG files included as sources 10, 11, and 12.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 3.5.0-1
changelog:
  - Update to 3.5.0
  - Patch nagios-3.4.3-spaces-to-plus-signs.patch (#952139)
    (upstream http://tracker.nagios.org/view.php?id=407)
  - Add cfg_dir=/etc/nagios/conf.d to the main nagios configuration file
    (nagios-3.5.0-conf.d-configuration-directory.patch) (#907145#c5)
  - Own the configuration directory /etc/nagios/conf.d (#907145#c5)
  - Ship the internet.cfg configuration file as documentation (#907145#c5)


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 3.5.0-2
changelog:
  - Insecure temporary file usage in nagios.upgrade_to_v3.sh (#958294)
  - Init script overwrites pid file unnecessarily (#983129)
  - Corrected bogus dates


author: Steven Pritchard <steve@kspei.com> 1.03e-1
changelog:
  - Update to 1.03e
  - Drop gcc43 patch (upstream has a fix)
  - Use configure and patch Makefile to install correctly


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Require erad-base-6Server-17 or later.
  - Do not allow login to image user.
  - Run scriptlets with bash.
  - Reorganize key sources for different users.
  - Make sure key management works the default way, after uninstall.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Add AuthorizedKeysCommands to sshd_config only, if this is install (don't run when it's an upgrade)
  - Sshd_config parser moved to erad-base.
  - Remove AuthorizedKeysCommands from sshd_config only, if this is uninstall (don't run when it's an upgrade)
  - Changed keyfile names to reflect function, not legacy.
  - Added monitoring and medsrv key list.
  - Removed root editable, user specific, empty key lists (rever back to use default auth.keys file)


author: Michael Schwendt <mschwendt@fedoraproject.org> - 1.2.19-3
changelog:
  - Fix duplicate documentation (#1001250)
  - Turn on verbose build output via V=1 make
  - Use %?_isa in explicit package deps
  - Fix base package Group tag to "System Environment/Libraries"
  - Remove %defattr


author: John Eckersberg <jeckersb@redhat.com> - 0.1.2-2
changelog:
  - Remove README and LICENSE from docs on -devel package
  - Remove -static package and merge contents into the -devel package


author: John Eckersberg <jeckersb@redhat.com> - 0.1.2-4
changelog:
  - Minor tweaks to spec file
  - Enable %check section
  - Thanks Gareth Armstrong <gareth.armstrong@hp.com>


author: John Eckersberg <jeckersb@redhat.com> - 0.1.5-1
changelog:
  - New upstream release 0.1.5 (bz1061087)
  - Removed patches for CVE-2013-6393; they are included in 0.1.5
    upstream


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed: Split 'erad-repo-medsrv<VER>' into 'erad-repo-medsrv<VER>-released', 'erad-repo-medsrv<VER>-unreleased' and 'erad-repo-medsrv<VER>-media'.


author: Steven Pritchard <steve@kspei.com> 2.05-1
changelog:
  - Update to 2.05.
  - Drop explicit Requires: perl(Crypt::CBC).
  - LD_RUN_PATH hack shouldn't be needed now.
  - Trim file list a bit.
  - License is BSD, more or less.


author: Christoph Maser <cmr@financial.com> - 0.33-2
changelog:
  - Use epoch due to broken version numbers upstream
  - ...
  - Changelog trimmed, see http://svn.rpmforge.net/svn/trunk/rpms/perl-Module-Build/perl-Module-Build.spec


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added: 32-bit dependencies for tarball released MEDSRV.
  - Changed: Add platform dependency requirement.
  - Added: provide


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added: Subpackage 'medsrv-tools-rpm' to contains dependencies, which will be resolved to 32 bit mysql-community-library/common packages.
  - Removed: 'medsrv-arch-provides' requirement, since medsrv-tools contains it.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added: support for 64 bit MEDSRV builds.
  - Changed: Removed 'rpm' and tarball subpackages. Functionality transferred to medsrv rpm framework.
  - Removed: Do not distruibute impatch and applyupdates anymore.
  - Added: tools package should require a 'medsrv-requires' package, ensuring the dependency list is installed on existing servers.
  - Removed: medsrv dependency list moved to to a medsrv-rpm built subpackage (along with repo config)


author: Hans de Goede <hdegoede@redhat.com> - 3.7-2
changelog:
  - Install translations
  - Fix selinux patch so that it will apply to the new version
  - Convert HACKING and ChangeLog files to UTF-8
  - Fix Source0 URL to match guidelines for sf.net URL's
  - Remove guideline violating explicit require for ncurses


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Fixed: SSH authorized keys were not added/removed after siteman cron job.
  - Changed: Complete rewrite of event handling (like. medinit, medsrv init, post install config)
  - Fixed: Add SSH RSA keys whenever it makes sense.
  - Changed: Add rsyslog, ldconfig conf entries before medsrvinit (where components exist).
  - Changed. Add updatesdb, ldconfig after medinit. It does not hurt.
  - Added: Apply ntp config on a daily basis.
  - Rewrite sitemanreg to use a single form to collect all data (instead of navigating into menus), while not esposing passwords.
  - Handle offline registration as a kind of siteman server.
  - Added: SMTP auth config to sendmail localconf script and localconf TUI itself.
  - Added: Scale dialog based tui apps based on terminal size (on startup). Scale size half the growth.
  - Fixed: Get rid of settings which does not work in RHEL 6.
  - Fixed: RPM repository manager in localconf tool handles repos and package groups properly.
  - Added to siteadminmenu (a tui app): secure root and logfile browser and tail widget.
  - Added to siteadminmenu: status display only result of implemented components. Use colorcode as well.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed: Use single symlink to mark mirror, localconf shuld handle this.
  - Fixed: Siteadmin RSA key list edit. Use dialog inputbox (not joe).
  - Changed: Use one symlink to mark a mirror. Split mirrorlist into 3 subdirs, use postfix on these subdirs.
  - Fixed: Run meduser syslog on 'post-medsrv-init' event, so owner of var and var/log dirs are not root.
  Changed: Use dialog --editbox in 'localconf' to edit authorized_keys, instead of joe.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed the path of all files, and all reference in files: replace imagemed-base to erad-base.
  - Changed the path of /usr/lib/erad-base/scripts to /usr/libexec/ in all files, and all reference in files.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Fixed: MEDSRV log file are not readable to medsrv.
  - Fixed: Disabled rate limit (unix socket and global) in syslog.conf.
  - Fixed: UMASK must be before any logfile definition in syslog.conf (global setting).
  - Fixed: Bind UDP listener to localhost  in syslog.conf
  - Added to syslog.conf: Async writting, but flush every 3 seconds, use 64K buffer.
  - Fixed: Debug_log must be consitently disabled or enabled (commented out or not) in syslog.conf.
  - Fixed: Exclude all local facilities from /var/log/messages in syslog.conf.
  - Fixed: SSHD config parser handled muliple Match blocks.
  - Renamed eimsiteadminmenu to siteadmin


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Support multiple Linux distros (preferably rebuilds like CentOS), while rely on erad-release about supported platform.
  - Added: Handle backup and sitedmin user the same way: enable/disable, lock/unlock password and edit ssh rsa keylist.
  - Added: Allow to add user keys to siteadmin shell.
  - Changed: Dependency chain between erad-release, erad-keys, erad-base and medsrv-tools.
  - Fixed: %post and %preun handles updates (which is not remove old+install new).
  - Added: allow to run postinstall (aka: service erad-base start) without running services (in chrooted install environment).
  - Sshd_parser code from erad-keys moved to sshauth include.
  - Removed: ssh RSA key management, erad-keys handles this.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Move 32-bit dependencies to medsrv-tools.
  - Revert back build arch to noarch.
  - Fixed: AcceptEnv was not removed from sshd_config.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - More relevant package summary and description.
  - Added: manual dependecy for sfdisk
  - Fixed: access to medsrv logfiles using sudoers rules for siteadmin(menu)
  - Added: 10 min tiemout for each menu level, in siteadmin shell.
  - Added: IP and bind info to virtual host list, Allow to bypass, when it' the only one - in siteadmin shell. 
  - Added: Currently logged in shell users, in siteadmin shell.
  - Fixed: Use default auth.keys file (backup, siteadmin, siteman), when editing it (in siteadmin shell).
  - Fixed: Run in chrooted/postinstall environment, without error messages.
  - Fixed: Siteadmin logfile access to medsrv logfiles.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Fixed: Store SMTP Auth data in private file
  - Fixed: SMTP Password input box
  - Fixed: Yum cache cleaned up durint chrooted postinstall, install stopped on erad-keys install.


author: Nick Bebout <nb@fedoraproject.org> - 0.97.5-1
changelog:
  - Upgrade to 0.97.5
  - Fix CVE-2012-1419 clamav: specially-crafted POSIX tar files evade detection
  - Fix CVE-2012-1457 clamav: overly long length field in tar files evade detection
  - Fix CVE-2012-1443 clamav: specially-crafted RAR files evade detection
  - Fix CVE-2012-1458 clamav: specially-crafted CHM files evade detection
  - Fix CVE-2012-1459 clamav: specially-crafted length field in tar files evade detection
  - Ship local copy of virus database; it was removed by accident from 0.97.5 tarball


author: Robert Scheck <robert@fedoraproject.org> - 0.98-1
changelog:
  - Upgrade to 0.98 and updated main.cvd and daily.cvd (#1010168)
  - Fixed discrepancies between clamd initscript and clamd config
    file (#960923, thanks to John Horne)
  - Added build requirement to ncurses-devel for clamdtop (again)
  - Moved clamd wrapper script and documentation into correct sub-
    package (#782596, thanks to Philip Prindeville)


author: Robert Scheck <robert@fedoraproject.org> - 0.98-2
changelog:
  - Really fix all discrepancies between clamd initscript and clamd
    config file (#960923, thanks to John Horne)
  - Ensure that a clamd and clamav-milter condrestart via initscript
    works (#1018312, thanks to Filippo Carletti)


author: Paul Wouters <pwouters@redhat.com> - 0.98.3-1
changelog:
  - Upgrade to 0.98.3
  - Fix --with-libcurl parameter to avoid automatic path detection breakage
  - openssl-devel is now required for hashing code.
  - Added clamsubmit to main package
  - Re-enabled --with-llvm as this speeds up deployment a lot.
  - Fixed older changelog dates


author: Robert Scheck <robert@fedoraproject.org> - 0.98.4-1
changelog:
  - Upgrade to 0.98.4 and updated daily.cvd (#1111811)
  - Add build requirement to libxml2 for DMG, OpenIOC and XAR


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added offline repository, including repo configs from install media.
  - Added erad-repo-config provide for both erad-repo and erad-repo-offline.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed: Stop generating repo configs. Use templates.
  - Changed: Use 1 repo conf for online, 1 for offline repos. Plus test repo.
  - Added: Support offline updates on install media.
  - Changed: add erad prefix to media, updates and test repository name (to avoid conflict with CentOS).


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Main package is a dummy from now on.
  - Rename 'erad-repo' package to 'erad-repo-released'
  - Declare all subpackages wih full name.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed: Rename 'erad-repo-unreleased' package back to 'erad-repo'.
  - Install test/unreleased repository along with released repository. Enable by config.
  - Removed: 'erad-repo-unreleased' subpackage.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed: Split 'erad-repo' package into 'erad-repo-released' and 'erad-repo-unreleased' again.
  - Added: Introduce 'develsandbox' repository and subpackage (successor of previous 'erad-test' repo).
  - Changed: all repositories are enabled by default.
  - Removed: OMSA and HP PSP repositories.
  - Changed: offline repository renamed to match with medsrv repo names.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 3.1.1-13
changelog:
  - Manual.pdf - file permissions corrected.
  - Included a demo .splintrc file as doc (splintrc.demo == src/.splintrc).


author: Milos Jakubicek <xjakub@fi.muni.cz> - 3.1.2-6
changelog:
  - Specfile sanity revisited: proper Provides/Obsoletes on lclint
    and some other minor changes to make rpmlint silent


author: Tomas Hoger <thoger@fedoraproject.org> - 2.3.4-1
changelog:
  - Update to upstream version 2.3.4, which fixes CVE-2012-3478 and CVE-2012-2252
  - Updated rsync-protocol.patch to fix CVE-2012-2251, and to apply on top of the
    CVE-2012-3478 and CVE-2012-2252 fixes.
  - Updated makefile.patch to preserve RPM CFLAGS.
  - Added command-line-error.patch (from Debian), correcting error message
    generated when insecure command line option is used (CVE-2012-3478 fix
    regression).


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 2.3.0b-2
changelog:
  - Fix -y segfault (#164698).
  - Make with CFLAGS and FLAGS to build with RPM optflags to
    repair debuginfo package.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.4.16-1
changelog:
  - Update to version 1.4.16
  - Dropped nagios-plugins-0005-Patch-for-check_linux_raid-with-on-linear-raid0-arra.patch
    (upstream).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.4.16-4
changelog:
  - Remove the erroneous requirements of nagios-plugins-ntp (#848830)
  - Ship check-ntp.pl in the new nagios-plugins-ntp-perl subpackage (#848830)


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.4.16-5
changelog:
  - Fix the use lib statement and the external ntp commands paths in check-ntp.pl
    (nagios-plugins-0008-ntpdate-and-ntpq-paths.patch).


author: Gabor Horvath <ghorvath@eradimagemedical.com>
changelog:
  - Added dependency for imagemed-meta, allowing to install new (but required) packages when updating the OS.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Add: run imagemed-base start after first boot
  - Remove dependencies for imagemed-meta. Imagemed-base will depend on it.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Changed dependency for erad-base.
  - Do not (schedule) post install script run (next reboot) anymore, erad-base does that itself.
  - Changed the function of this package: build one for each platform supported, require support from erad-base to this paltform.


author: Michael Brown <michael-e_brown at dell.com> - 2.2.22-1
changelog:
  - Fixup bug in reading asset and service tag where it A) read checksum from wrong location and B) used wrong comparison check to validate it
  - enable service tag SET for machines that still set service tag in CMOS
  - ABI/API - change to -fvisibility=hidden for libsmbios_c.so.*, mark public api's. This removes all non-public symbols that were not formerly part of the ABI from the dynamic link table.


author: Michael Brown <michael-e_brown at dell.com> - 2.2.25-1
changelog:
  - Fix breakage resulting from improperly fixing up constructors for MemoryAccess/CmosAccess. Fixes CLI utilities.


author: Paul Howarth <paul@city-fan.org> 1:0.5.17-21
changelog:
  - Buildreq pkgconfig, because EL5's glib-devel should require it but doesn't
  - Use file-based build dependency on /usr/include/tcpd.h instead of
    tcp_wrappers package, since some distributions have this file in
    tcp_wrappers-devel


author: Paul Howarth <paul@city-fan.org> 1:0.5.17-22
changelog:
  - Fix multiarch conflicts in -config scripts (#342801)
  - Clarify licensing (libs LGPLv2+, binaries GPLv2+)
  - Preserve timestamps for files copied from source into installed package
  - Build and install using system libtool to avoid bogus rpath on 64-bit arches


author: Paul Howarth <paul@city-fan.org> 1:0.5.17-25
changelog:
  - Specify Instruction Set Architecture (%{?_isa}) in devel package requires
  - Buildreq glibc-static for test code in bundled popt library (F-11 onwards)


author: Paul Howarth <paul@city-fan.org> 1:0.5.17-26
changelog:
  - Fix undefined non-weak symbols in libORBit and libORBitCosNaming
  - Use an alternative approach to rpath-fixing - hacking the supplied libtool
    rather than trying to use the system one


author: Paul Howarth <paul@city-fan.org> - 1:0.5.17-29
changelog:
  - Manual dependency of devel package on pkgconfig not needed from F-11, EL-6
  - %{_datadir}/aclocal included in filesystem package from F-14
  - BR: glibc-static for EL-6 onwards


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - More relevant package summary and description.
  - Added: manual dependecy for sfdisk
  - Fixed: access to medsrv logfiles using sudoers rules for siteadmin(menu)
  - Added: 10 min timeout for each menu level, in siteadmin shell.
  - Added: IP and bind info to virtual host list, Allow to bypass, when it' the only one - in siteadmin shell. 
  - Added: Currently logged in shell users, in siteadmin shell.
  - Fixed: Use default auth.keys file (backup, siteadmin, siteman), when editing it (in siteadmin shell).
  - Fixed: Run in chrooted/postinstall environment, without error messages.
  - Fixed: Siteadmin logfile access to medsrv logfiles.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Add Medsrv's ImageMagick lib path to ld.so.conf database (Support dynamic build)
  - Remove ImageMagick from default packages, put it into dontinstall group.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added trigger scripts, when 32 bit mysql lib, or mysql server is installed/uninstalled. Handle added my.cnf, remove when not installed.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Support medsrvinit -first|-upgrade parameters.
  - Fixed: Upper case value of 'OSPRODUCT' broke dependency: 'erad-base-RHEL-support' is right.


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added: Changes in MYSQLD_MODE=SYSTEM mode require platform support in /etc/sysconfig/mysqld, sudoers and medsrv/mysql usergroup membership (both ways). These should allwo to use the mysql datadir under medsrv hom by a system mysqld.


author: Tim Waugh <twaugh@redhat.com> 1.1-39
changelog:
  - Added URL tag (bug #226436).
  - Removed prefix tag (bug #226436).
  - Fixed build root (bug #226436).
  - Added dist to release tag (bug #226436).
  - Use RPM_OPT_FLAGS (bug #226436).
  - Use smp_mflags (bug #226436).
  - Fixed summary (bug #226436).
  - Fixed license (bug #226436, bug #190125).
  - Ship license (bug #226436).
  - Ship phone_log script as doc (bug #226436).


author: Steven Pritchard <steve@kspei.com> 0.16-1
changelog:
  - Update to 0.16.
  - Canonicalize Source0 URL.
  - Fix find option order.
  - Use fixperms macro instead of our own chmod incantation.
  - Drop our copies of the license files.
  - BR ExtUtils::MakeMaker.
  - Drop LD_RUN_PATH filter.


author: Kevin Fenzi <kevin@scrye.com> 2.14-3
changelog:
  - Apply patch from bug 860988 to handle RHEL versions and systemd
  - Apply patch from bug 957567 to fix condrestart so nrpe restarts on upgrade.
  - Rework systemd and service scriptlets and requires.
  - Harden Fedora 19+ builds


author: Peter Lemenkov <lemenkov@gmail.com> - 2.14-5
changelog:
  - Allow building for aarch64 (rhbz #926244)
  - Allow user to redefine default commands (rhbz #963703)


author: Dries Verachtert <dries@ulyssis.org> - 2.2-1.2
changelog:
  - Rebuild for Fedora Core 5.
  - ...
  - Changelog trimmed, see http://svn.rpmforge.net/svn/trunk/rpms/denyhosts/denyhosts.spec


author: Christoph Maser <cmr$financial,com> - 2.6-2
changelog:
  - make /etc/denyhosts
  - copy dist-conf to /etc/denyhosts/denyhosts.cfg
  - copy daemon-control-dist /etc/init.d/denyhosts
  - edit /etc/init.d/denyhosts to use /etc/denyhosts/denyhosts.cfg
  - ignore arch in /usr/lib/python2.6/site-packages since python setup ignores it too


author: Steve Huff <shuff@vecna.org> - 2.6-4
changelog:
  - imported regex security patch from Fedora
    https://bugzilla.redhat.com/show_bug.cgi?id=244943
    http://www.ossec.net/main/attacking-log-analysis-tools#denyhosts


author: Kouhei Sutou <kou@clear-code.com> - 2.6-5
changelog:
  - Fixed download URL at SF.net.
  - Added missing imported regex security patch from Fedora.
  - Added .egg-info into .rpm.


author: Paul Howarth <paul@city-fan.org> 1.0.58-1
changelog:
  - update to 1.0.58
    - fix bug with png_handle_hIST with odd chunk length
    - fix incorrect type (int copy should be png_size_t copy) in png_inflate()
      (CVE-2011-3045)
    - fix off-by-one bug in png_handle_sCAL() when using fixed point arithmetic,
      causing out-of-bounds read in png_set_sCAL() because of failure to copy
      the string terminators
    - remove the png_free() of unused png_ptr->current_text from pngread.c
    - remove all of the assembler code from pnggccrd.c and just "return 2;"


author: Paul Howarth <paul@city-fan.org> 1.0.59-1
changelog:
  - update to 1.0.59
    - revised png_set_text_2() to avoid potential memory corruption
      (CVE-2011-3048)
    - prevent PNG_EXPAND+PNG_SHIFT doing the shift twice


author: Paul Howarth <paul@city-fan.org> 1.0.60-4
changelog:
  - tweak config.guess and config.sub to add aarch64 support (#925862)
  - update source URL, moved upstream


author: Paul Howarth <paul@city-fan.org> 1.0.60-6
changelog:
  - handle zero-length PLTE chunk or NULL palette with png_error(), to avoid
    later reading from a NULL pointer (png_ptr->palette) in
    png_do_expand_palette() (CVE-2013-6954)


author: Paul Howarth <paul@city-fan.org> 1.0.61-1
changelog:
  - update to 1.0.61
    - ignore, with a warning, out-of-range value of num_trans in png_set_tRNS()
    - replaced AM_CONFIG_HEADER(config.h) with AC_CONFIG_HEADERS([config.h]) in
      configure.ac
    - changed default value of PNG_USER_CACHE_MAX from 0 to 32767 in pngconf.h
    - avoid a possible memory leak in contrib/gregbook/readpng.c
    - revised libpng.3 so that "doclifter" can process it
    - changed '"%s"m' to '"%s" m' in png_debug macros to improve portability
      among compilers
    - rebuilt the configure scripts with autoconf-2.69 and automake-1.14.1
    - removed potentially misleading warning from png_check_IHDR()
    - quiet set-but-not-used warnings in pngset.c
    - quiet an uninitialized memory warning from VC2013 in png_get_png()
    - quiet unused variable warnings from clang by porting PNG_UNUSED() from
      libpng-1.4.6
    - added -DZ_SOLO to CFLAGS in contrib/pngminim/*/makefile
    - added an #ifdef PNG_FIXED_POINT_SUPPORTED/#endif in pngset.c
  - drop upstreamed aarch64 patch
  - drop patch for CVE-2013-6954, which only actually affected libpng versions
    1.6.1 to 1.6.7


author: Panu Matilainen <pmatilai@redhat.com> - 4.1.2-13
changelog:
  - avoid linking against libstdc++ (#165080)
  - fix debuginfo contents by building with -g (#250035)
  - autoreconf needed for the above, buildrequire autoconf, automake + libtool
  - include api documentation in apidocs subpackage
  - buildrequire graphviz for generating graphics in apidocs
  - license clarification


author: Robert Scheck <robert@fedoraproject.org> 4.1.2-17
changelog:
  - Removed -fomit-frame-pointer to fix debuginfo (#438262 #c5)
  - Disabled beecrypt-java subpackage again (#151294, #438262 #c6)


author: Gabor Horvath <ghorvath@erad.com>
changelog:
  - Added: Enable ssh based backup account.
  - Added: Sudoers config to allow chmoding ~var/mysql directory.
  - Added: New global yum directives.
  - Removed: requirment for nscd.


author: Simone Caronni <negativo17@gmail.com> - 2.2.0.3-18
changelog:
  - Add ZFS On Linux patches for additional functionality/bugfixes (#1023598).
    Thanks to Darik Horn and Brian Behlendorf.


author: Simone Caronni <negativo17@gmail.com> - 2.2.0.3-19
changelog:
  - Add macros to the top of the man page to fix displaying on el5/el6 (#986660).
    Thanks to Darik Horn for the fix.


author: Simone Caronni <negativo17@gmail.com> - 2.2.0.3-25
changelog:
  - Enable all patches also for RHEL 5 builds.
  - Skip initramfs/initrd rebuild if not requested (#1109601).


author: Silas Sewell <silas@sewell.ch> - 1.2.6-3
changelog:
  - Add Fedora build flags
  - Send all scriplet output to /dev/null
  - Remove debugging flags
  - Add redis.conf check to init script


author: Chris Ricker <kaboom@oobleck.net> 2.4b2-3
changelog:
  - Simplify doc packaging (Matthias Saou)
  - Simplify clean (Matthias Saou)
  - Don't strip fping6 binary (Matthias Saou)
  - Preserve timestamps


author: Simone Caronni <negativo17@gmail.com> - 2.2.0.3-27.git.2238e7b
changelog:
  - Update to latest git, 99% of the patches merged upstream.
  - Simplify SPEC file.
  - Fix inter-module dependencies (#1140812).
    Thanks Bruno Faccini.


author: Trond Hasle Amundsen <t.h.amundsen@usit.uio.no> - 3.7.12-1
changelog:
  - Upstream release 3.7.12
  - Conditionalize building man pages for rhel6+ and fedora19+ (others
    will use pre-built man pages)
  - Conditionalize require nagios-common (rhel6+/fedora19+) or
    nagios-plugins (others) for owner of the plugins directory
  - Drop perl(Crypt::Rijndael) requirement, as it provides optional and
    very rarely used functionality


